Tunze Stream Rock 6200.25

With special insert for every kind of Turbelle® stream, apart from nanostream. Made of white ceramic stone, suitable for fresh water as well as seawater, for a high water throughput. It enables a decorative integration of these circulation pumps in the aquarium.

Tunze Single Controller

For the wave simulation of a Turbelle® electronic or stream 6000/6100/6200 including connecting cable. Y adapter 7092.34 can be used to synchronously operate two Turbelle® electronic. If the photo-electric cell 7094.05 (not included in the scope of delivery) is attached to the connecting port, the night-mode operation is activated automatically.

Food Timer:
By the push of a button, the pumps can be stopped to enable feeding. After about eight to ten minutes, a restart is carried out automatically.

Singlecontroller: (7091.000)

Tunze Multi Controller

TUNZE® Multicontroller 7095 is a digital control unit for all Turbelle® pumps fitted with driver 7240.26 and 7240.27 operating on safety extra-low voltage.

It simulates the various marine current conditions in the aquarium, and thus is suitable for use with Turbelle® 7200/2, 7300/2, 7400/2, 6000, 6100, 6200. By means of the pump adapter 7094.40, Turbelle® classic 2002, 4002 can also be controlled.

Multicontroller 7095 can control up to eight Turbelle®, and contains an LED moonlight with a 29-day moon phase. A wavebox 6212 and the pumps mentioned above can also be controlled by the Multicontroller. The clearly arranged operating panel with a waterproof membrane keypad and adjusting knobs ensures a precise and practice-oriented operation. The output of the controlled pumps is shown by an LED display indicating from 30 to 100 per cent.
Delivery with four connecting cables 7092.30 and a photo-electric cell, permitting a near-natural current control with up to four Turbelle® electronic. Y adapter 7092.34 can be used to connect up to eight Turbelle® electronic which are controlled in pairs.

Accessories (order separately).

Multicontroller (7095.000).

Tunze 7096 USB Multicontroller

TUNZE® Multicontroller 7096 is a control device for all Turbelle® pumps fitted with an electronic motor, which can be adjusted and programmed by computer when attached by USB cable. The controller has been fitted with an 8-bit high-performance micro-processor and a memory module, which keeps the settings stored even in case of a power failure:
For adjustment by computer, the Multicontroller does not need a connection to the pumps in the tank.
After adjustment by and saving on the computer, the updated data remain saved in the Multicontroller as well.
TUNZE® Multicontroller 7096 comprises the functions of Multicontroller 7095 and Wavecontroller 6091 as well as some additional new control possibilities. It simulates various marine flow conditions in the aquarium and has been fitted with an especially bright LED moonlight.
Scope of delivery: Multicontroller with photo-electric cell, moonlight, holding device and 5 m (196.8 in.) USB cable, four connection cables, CD with Windows compatible control program.
Suitable for MS-Windows 98, 2000, XP, Win7 and Vista.

Tunze Y-Adapter

Extends two output connections to 2 x 2 input connections; including four connection cables 7092.30.

Y-Adapter (7092.340)

Tunze Photo Electric Cell

Permits operation in night mode with Singlecontroller 7091. Standard feature in Multicontroller 7095.

Photo-electric cell (7094.050).

Tunze Magnet Holders

Tunze Magnet Holders 6080.50 and 6200.50 can be used to mount all Turbelle pumps and Comline components.

All other TUNZE® units, such as the sensors of Osmolator 3155, Osmomat, et cetera, can also be mounted, provided the standard sliding unit fits into the magnetic holding device, which consists of two magnetic parts.

The inside part (1) is located in the water and the outside unit (2) is on the outside of the aquarium. Both parts are of identical shape. The inside part with the sliding unit (3) can be used to easily position the pump or Comline component at the requested location on the inside of the glass pane.

Subsequently, the outside unit has to be placed at the same position on the outside of the glass pane. On account of its encapsulated construction, the magnetic holder is noncorroding and has no detrimental effects on the aquarium biotope.

The Magnetic Holder 6080.50 has a magnetic strength suitable for glass thicknesses of up to 12 mm (.47 in) and Magnetic Holder 6200.50 can be used for glass panes up to 19 mm (.74 in).

Magnet Holder 12mm : 6080.50

Tunze Outlet for Retrofit 1074/2

The outlet does not require a borehole in the glass, and thus can be retrofitted. Even after an interruption of the recirculation pump, it will continue to operate. In combination with the outlet hose and fittings 1075/2, the outlet can be used up to abt. 1,200 l/h (317 USgal./h). With additional overflow 1001.74, it can be used up to 1,500 l/h (396 USgal./h).

Tunze Outlet Hose 1075/2

Consisting of 2m (78.7in.) special outlet hose, diam. 40mm (1.57in.), with clamps and holder.

Tunze Overflow Tube

Inside diameter 25mm (.98 in.), outside diameter 27mm (1.06 in.), including bushing 1001.780

Product Code ID 1001.74

Tunze Nano Reefpack 200

TUNZE® Nano Reefpack 200 constitutes a new water treatment concept for small reef aquariums from 40 to 200 litres (10 to 52 USgal.). It consists of a Nano DOC Skimmer 9002 with a 150-liters (39 USgal.) air output, a mechanical Nano Cleaner with a pump (800l/h/211USgal./h) and a magnet holder. The Nano Reefpack has been designed for beginners as well as for experienced aquarists. Thus, it is possible to operate a small marine or reef biotope aquarium in any standard glass tank without any complications. The water is treated on the basis of dirt removal and contains no biological stages. Like all TUNZE® components, the Nano Reefpack is a modular solution, which can be supplemented with Osmolator 3155 and Calcium Dispenser, etc.

The Nano Reefpack 200 in detail:

SKIMMING ACTION: Nano DOC Skimmer 9002.
FILTER ACTION: Nano Cleaner 3165 with an output of 800l/h (211 USgal./h), micro wadding 872.01 and filter bag for activated carbon and other absorbers, such as for phosphate.
STORAGE TANK 5002.10: with a volume of 13 litres (3.4 USgal.); is used to hold the refill water.
HOLDING DEVICE: The Nano Reefpack is supplied with Magnet Holder 6080.50 as a standard feature to permit mounting at any point in the aquarium (up to a glass thickness of 12mm (.47in.).
POWER CONSUMPTION: Only 20 W for all components, 230V/50Hz (115V/60Hz).
DELIVERY CONDITION: Completely ready for mounting with holding device, storage tank and filter wadding. Dimensions of the skimmer cup: L120 x W114 x H338mm (L4.7 x W4.4 x H13.3in).

Tunze Nano Cleaner 3165

The Nano Cleaner can be placed in a corner of the aquarium discreetly, and is based on the surface surfaction principle. It has a large filter volume and has been fitted with a filter pump offering a variable output of 150 to 800 l/h (39 to 211 US gal./h). The filter chamber can be filled with loose micro / macro wadding as well as with activated carbon or other absorbers, such as phosphate removers or peat. In case of larger systems without surface suction with an external cup filter, for example, the Nano Cleaner is a perfect solution to remove the surface film. In a fresh-water tank, the Nano Cleaner renders a better filtering performance than conventional internal filters fitted with simple filter sponges.

Delivery condition: Ready-to-mount with filter bag for activated carbon or other absorbing media, pump, flow deflector and holding device.

Dimensions: L125 x W55 x H220mm (L4.9 x W2.1 x H8.6in.)
Maximum immersion depth: approx. 210 mm (8.2 in.)
Holding device for attachment to vertical and horizontal panes
Variable pumping capacity from 150 to 800 l/h (39.6 to 211 USgal.)
230V/50Hz (115V/60Hz), Filtration capacity for aquariums from 40 to 200 litres (10 to 52 USgal.) of salt water/fresh water.